Cisco AIR-LAP1252AG-E-K9 Datasheet
The Cisco AIR-LAP1252AG-E-K9 is a wireless access point in the Aironet 1250 series. Every figure below is quoted from Cisco official documentation.
AP with 2 radios installed:...Weight
Key Specifications
| Part number (AIR-LAP1252AG-E-K9) | AIR-LAP1252AG-x-K9 802.11a/g/n 2.4/5-GHz Unified AP; 6 RP-TNC |
|---|---|
| Software | Cisco IOS Software Release 12.4(21a)JA or later (Standalone Mode) • Cisco IOS Software Release 12.4(10b) JDD or later (Unified Mode) • Cisco Unified Wireless Network Software Release 7.0 or later. |
| 802.11n capabilities | 2x3 MIMO with two spatial streams • Maximal Ratio Combining (MRC) • 20-and 40-MHz channels • PHY data rates up to 300 Mbps • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) • 802.11 DFS (Bin 5) • Cyclic Shift Diversity (CSD) support |
| Data rates supported (802.11a) | 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps |
| Data rates supported (802.11g) | 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps |
| Frequency band and 20-MHz operating channels (E regulatory domain) | E (E Reg Domain): • 2.412 to 2.472 GHz; 13 channels • 5.180 to 5.320 GHz; 8 channels • 5.500 to 5.700 GHz, 8 channels |
| Maximum non-overlapping channels (2.4 GHz) | 2.4 GHz • 802.11b/g: • 20 MHz: 3 • 802.11n: • 20 MHz: 3 |
| Maximum non-overlapping channels (5 GHz) | 5 GHz • 802.11a: • 20 MHz: 21 • 802.11n: • 20 MHz: 21 • 40 MHz: 9 |
| Antenna connectors | 2.4-GHz: 3 RP-TNC connectors • 5-GHz: 3 RP-TNC connectors |
| Interfaces | 10/100/1000BASE-T autosensing (RJ-45) • Management console port (RJ45) |
| Indicators | Status LED indicates operating state, association status, error/warning condition, boot sequence, and maintenance status. • Ethernet LED indicates activity over the Ethernet, status. • Radio LED indicates activity over the radio, status. |
| Number of radio module slots | Number of radio module slots: 2 |
| Radio module (2.4 GHz) | AIR-RM1252G-x-K9 802.11g/n-d2.0 2.4-GHz Radio Module; 3 RP-TNC |
| Radio module (5 GHz) | AIR-RM1252A-x-K9 2.4 802.11a/n-d2.0 5-GHz Radio Module; 3 RP-TNC |
| Dimensions (W x L x H) | AP (without mounting bracket): 8.12 x 9.52 x 2.35 in. (20.62 x 24.18 x 5.97 cm) |
| Dimensions with mounting bracket (W x L x H) | AP (with mounting bracket): 8.12 x 9.52 x 2.75 in. (20.62 x 24.18 x 6.99 cm) |
| Weight | AP with 2 radios installed: 5.1 lbs (2.31 kg) |
| Weight (chassis) | AP chassis: 2.1 lbs (0.95 kg) |
| Operating temperature | Operating temperature: -4 to +131°F (-20 to +55°C) |
| Storage temperature | Nonoperating (storage) temperature: -40 to 185°F (-40 to 85°C) |
| Operating humidity | Operating humidity: 10 to 90 percent (noncondensing) |
| DRAM | 64 MB DRAM |
| Flash memory | 32 MB flash |
| Input power requirements | AP1250: 36 to 57 VDC • Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz |
| Powering options | Cisco Catalyst switch port capable of sourcing 20W or greater • Cisco AP1250 Power Injector (AIR-PWRINJ4) • Cisco AP1250 Local Power Supply (AIR-PWR-SPLY1) • 802.3af switch (AP1250 with single radio only) |
| Power draw (two radio modules) | AP1250 with two RM1252 radio modules installed: 18.5W |
| Power draw (one radio module) | AP1250 with one RM1252 radio module installed: 12.95W |
| Warranty | Limited Lifetime Hardware Warranty |
| Mean time between failures (MTBF) | 380,000 |
Specifications are quoted verbatim from the Cisco official data sheet; no values are estimated.
Frequently Asked Questions
What is the Cisco AIR-LAP1252AG-E-K9?
The Cisco AIR-LAP1252AG-E-K9 is a wireless access point in the Aironet 1250 series. Every figure below is quoted from Cisco official documentation.
What is the operating temperature range of the Cisco AIR-LAP1252AG-E-K9?
It operates from Operating temperature: -4 to +131°F (-20 to +55°C).
How much does the Cisco AIR-LAP1252AG-E-K9 weigh?
It weighs AP with 2 radios installed: 5.1 lbs (2.31 kg).
Need current pricing or availability for the Cisco AIR-LAP1252AG-E-K9? See the AIR-LAP1252AG-E-K9 product page or request a quote.