Juniper EX4200-48T Datasheet
The Juniper EX4200-48T is a switch in the Juniper EX4200 series. Every figure below is quoted from Juniper official documentation.
136 GbpsSwitching capacity
101 MppsForwarding rate
48 x 10/100/1000BASE-TPorts
Key Specifications
| Form factor | Fixed 1U access |
|---|---|
| Ports | 48 x 10/100/1000BASE-T (8 PoE) |
| Uplink configuration | Optional uplink module: 4 x GbE SFP, 2 x 10GbE XFP, or dual-mode 2 x 10GbE SFP+ / 4 x GbE SFP |
| Switching capacity | 136 Gbps |
| Forwarding rate | 101 Mpps |
| Backplane speed | 128 Gbps Virtual Chassis |
| PoE budget | 130 W |
| DRAM | 1 GB with ECC |
| Flash | 1 GB |
| MAC addresses | 32,000 |
| Jumbo frame | 9216 bytes |
| Maximum active VLANs | 4,096 |
| ARP entries | 16,000 |
| IPv4 unicast routes | 16,000 |
| IPv4 multicast routes | 8,000 |
| IPv6 unicast routes | 4,000 |
| IPv6 multicast routes | 2,000 |
| Dimensions (W x H x D) | 17.41 x 1.72 x 16.43 in (44.21 x 4.32 x 41.73 cm) |
| Weight | 17.1 lb (7.8 kg) with 320 W AC power supply |
| Operating temperature | 0 to 45 C |
Specifications are quoted from the official Juniper datasheet for this model; no values are estimated.
Frequently Asked Questions
What is the Juniper EX4200-48T?
The Juniper EX4200-48T is a switch in the Juniper EX4200 series. Hardware specifications on this page are quoted from Juniper official documentation.
What is the switching capacity of the Juniper EX4200-48T?
The switching capacity is 136 Gbps.
What is the forwarding rate of the Juniper EX4200-48T?
The forwarding rate is 101 Mpps.
What ports does the Juniper EX4200-48T provide?
It provides 48 x 10/100/1000BASE-T (8 PoE).
What is the PoE budget of the Juniper EX4200-48T?
The PoE power budget is 130 W.
Need current pricing or availability for the Juniper EX4200-48T? See the EX4200-48T product page or request a quote.