Juniper EX4200-24P Datasheet
The Juniper EX4200-24P is a switch in the Juniper EX4200 series. Every figure below is quoted from Juniper official documentation.
88 GbpsSwitching capacity
65 MppsForwarding rate
24 x 10/100/1000BASE-T PoE+Ports
Key Specifications
| Form factor | Fixed 1U access |
|---|---|
| Ports | 24 x 10/100/1000BASE-T PoE+ (802.3at) |
| Uplink configuration | Optional uplink module: 4 x GbE SFP, 2 x 10GbE XFP, or dual-mode 2 x 10GbE SFP+ / 4 x GbE SFP |
| Switching capacity | 88 Gbps |
| Forwarding rate | 65 Mpps |
| Backplane speed | 128 Gbps Virtual Chassis |
| PoE budget | 410 W |
| DRAM | 1 GB with ECC |
| Flash | 1 GB |
| MAC addresses | 32,000 |
| Jumbo frame | 9216 bytes |
| Maximum active VLANs | 4,096 |
| ARP entries | 16,000 |
| IPv4 unicast routes | 16,000 |
| IPv4 multicast routes | 8,000 |
| IPv6 unicast routes | 4,000 |
| IPv6 multicast routes | 2,000 |
| Dimensions (W x H x D) | 17.41 x 1.72 x 16.43 in (44.21 x 4.32 x 41.73 cm); 18.8 in (47.8 cm) deep with 600 W or 930 W AC power supply |
| Weight | 17.2 lb (7.8 kg) with 600 W AC power supply |
| Operating temperature | 0 to 45 C |
Specifications are quoted from the official Juniper datasheet for this model; no values are estimated.
Frequently Asked Questions
What is the Juniper EX4200-24P?
The Juniper EX4200-24P is a switch in the Juniper EX4200 series. Hardware specifications on this page are quoted from Juniper official documentation.
What is the switching capacity of the Juniper EX4200-24P?
The switching capacity is 88 Gbps.
What is the forwarding rate of the Juniper EX4200-24P?
The forwarding rate is 65 Mpps.
What ports does the Juniper EX4200-24P provide?
It provides 24 x 10/100/1000BASE-T PoE+ (802.3at).
What is the PoE budget of the Juniper EX4200-24P?
The PoE power budget is 410 W.
Need current pricing or availability for the Juniper EX4200-24P? See the EX4200-24P product page or request a quote.