New Promotion

-77%
Cisco N540X-16Z4G8Q2C-D: A high-performance router
$9726 $2212
-53%
C9115AXI-H - Cisco Catalyst 9100 Access Point
$1448 $684
-52%
Cisco C6800-8P40G-XL Catalyst 6800 Series 8-Port 40 Gigabit
$81347 $38800
-40%
Cisco Catalyst 9300 Series Switch C9300X-48TX-E
$4181 $2508
-41%
C9200L-48P-4G-E Used Cisco Catalyst 9200L 48-Port PoE+ Switch
$1612 $950

Cisco C9300-NM-8X Network Module: Specs, Compatibility and Buying Guide
Nov 18 , 2026 1

The Cisco C9300-NM-8X is the 8-port 10-Gigabit network module for the Catalyst 9300 series. It adds eight 10GE SFP+ uplink ports (80 Gbps of aggregate uplink capacity) to any C9300 chassis, and it is field-replaceable — no switch downtime required for planning a future upgrade. If you are deciding whether to buy it, which transceivers it takes, or whether the 2Q or 2Y module fits your roadmap better, this guide covers everything with the official numbers.

What Is the C9300-NM-8X?

Catalyst 9300 switches ship by default without a network module. The NM slot is empty until you order one of five optional modules, and the C9300-NM-8X is the most widely deployed of them: eight 10GbE SFP+ ports that serve as uplinks from the access layer to your core, or as direct server and AP connections in collapsed designs.

Because the module is field-replaceable, a common buying pattern is to start with 1G uplinks today and add the C9300-NM-8X when 10G demand arrives — the swap takes minutes and does not require a forklift chassis upgrade.

C9300-NM-8X Specifications

These are the official figures from the Cisco Catalyst 9300 series data sheet, with no reseller embellishment:

SpecificationValue
Part numberC9300-NM-8X
Ports8 x 10GE SFP+
Aggregate uplink capacity80 Gbps
MediaSFP+ transceivers or DAC/AOC cables (fiber and copper via appropriate modules)
InstallField-replaceable network module slot in Catalyst 9300 chassis
Compatible platformCisco Catalyst 9300 series switches

C9300-NM-8X vs Other Catalyst 9300 Network Modules

Cisco offers five network modules for the Catalyst 9300. Picking the right one is a bandwidth-and-cabling decision, not a "bigger is better" decision:

ModulePortsTypical Use Case
C9300-NM-4G4 x 1G SFPGigabit fiber uplinks, legacy aggregation
C9300-NM-4M4 x Multigig (mGig) copperWi-Fi 6/6E AP uplinks over existing copper, 2.5G/5G/10G Base-T
C9300-NM-8X8 x 10GE SFP+Mainstream 10G uplinks — the default choice for most campus cores
C9300-NM-2Q2 x 40GE QSFP+High-bandwidth data center interconnects
C9300-NM-2Y2 x 25GE SFP2825G migration path from 10G

One practical note: the C9300-NM-8X supports 10G only — it does not do 25G. If your three-year roadmap includes 25G, the C9300-NM-2Y is the module to evaluate instead. If your uplink budget is 10G or less (which covers the majority of campus deployments), the 8X wins on port density: eight ports versus two or four on the alternatives.

Which Switches Accept the C9300-NM-8X?

The module fits the Cisco Catalyst 9300 series chassis. Two compatibility checks before you buy:

  • C9300L models are different hardware. The 9300L ("Light") SKU uses its own network module family — a C9300-NM-8X does not fit a C9300L. Verify your exact switch model on the chassis label first.
  • Transceiver choice is separate from the module. The 8X takes standard 10G SFP+ optics (SR, LR, ER, ZX) and 10G DAC/AOC cables, so your existing 10G transceiver inventory carries over.

When Do You Actually Need the C9300-NM-8X?

Based on deployment patterns, the 8X earns its slot in three scenarios:

  • Dense 10G uplinks. Eight ports let you build redundant uplinks across a stack of switches without splitting bandwidth, versus the 2-port 2Q or 2Y modules.
  • Wi-Fi 6/6E refresh. Multi-gig APs still aggregate back at 10G — a pair of 8X modules gives you the uplink headroom behind mGig access ports.
  • Phased 10G migration. You keep 1G today, and the field-replaceable slot design means the 10G upgrade is a module swap, not a chassis replacement.

If you need only 2-4 uplink ports and want maximum future bandwidth per port, compare the 2Q (40G) and 2Y (25G) instead — but for mainstream 10G campus designs, the 8X is the highest-density option at the lowest cost per port.

Refurbished C9300-NM-8X: What to Check Before Buying

New-sealed 8X modules carry list pricing that surprises most buyers. A tested, genuine used module from a reputable reseller typically saves 60-80% with the same hardware. Before buying refurbished, check three things: the part number on the label matches your order (counterfeits exist in this SKU), the seller tests SFP+ port link integrity on all eight ports (not just visual inspection), and the warranty terms are stated in writing.

At LinkNewNet every C9300-NM-8X is a genuine Cisco part, tested before shipping, with a 3-month warranty. See current price and stock on our C9300-NM-8X product page.

FAQ

Does the C9300-NM-8X support 25G?

No. The 8X is a 10G module (8 x 10GE SFP+). For 25G on the Catalyst 9300, use the C9300-NM-2Y (2 x 25GE SFP28).

Can I use 1G SFP transceivers in the C9300-NM-8X?

The 8X is designed for 10G SFP+ optics. For native 1G uplinks, Cisco's C9300-NM-4G (4 x 1G SFP) is the matching module. Check your Cisco data sheet for the supported transceiver list on your IOS XE release before reusing older optics.

Does the C9300-NM-8X fit the Catalyst 9300L?

No. The 9300L is a separate hardware platform with its own network module family. The C9300-NM-8X fits standard Catalyst 9300 chassis only.

Is the network module included with a new Catalyst 9300?

No. Default switch configurations do not include a network module — it is ordered as a separate line item, either with the switch or later as a field upgrade.

How much uplink capacity does the C9300-NM-8X provide?

Eight 10G ports = 80 Gbps aggregate uplink capacity per module.

Related Blogs

WhatsApp
Quote
Contact
Top