New Promotion

-77%
Cisco N540X-16Z4G8Q2C-D: A high-performance router
$9726 $2212
-53%
C9115AXI-H - Cisco Catalyst 9100 Access Point
$1448 $684
-52%
Cisco C6800-8P40G-XL Catalyst 6800 Series 8-Port 40 Gigabit
$81347 $38800
-40%
Cisco Catalyst 9300 Series Switch C9300X-48TX-E
$4181 $2508
-41%
C9200L-48P-4G-E Used Cisco Catalyst 9200L 48-Port PoE+ Switch
$1612 $950

Cisco C9300-NM-4G Network Module Guide: 4x 1G SFP Uplinks
Nov 19 , 2026 1

The Cisco C9300-NM-4G is the 4-port Gigabit Ethernet SFP uplink network module for modular-uplink Cisco Catalyst 9300 switches. It adds four 1G SFP ports (GigabitEthernet1/1/1 through 1/1/4), it is field-replaceable and hot-swappable, and it costs a fraction of what a fixed-uplink upgrade would. If your Catalyst 9300 needs four 1G fiber or copper uplinks to the distribution or core layer, this is the module for the job.

This guide covers the verified specifications, compatibility rules that trip up a lot of buyers, how the C9300-NM-4G compares with the other four Catalyst 9300 network modules, and what to check before you buy a used unit.

C9300-NM-4G Specifications

SpecificationValue
Product numberC9300-NM-4G (spare: C9300-NM-4G=)
DescriptionCatalyst 9300 4 x 1GE SFP Network Module
Uplink ports4 x 1G SFP
Interface namingGigabitEthernet1/1/1 - GigabitEthernet1/1/4
Supported optics1000BASE-SX (multimode fiber), 1000BASE-LX (single-mode fiber), 1000BASE-T copper SFP
Hot-swappableYes, field-replaceable
MTBF8,953,570 hours (Cisco data sheet)
TAA compliantYes
PowerDrawn from the host switch; adds roughly 3-15 W depending on optics and switch model
WeightAbout 0.3 kg

Two details worth knowing before you buy. First, the module itself needs no license — licensing lives on the host Catalyst 9300 (Network Essentials/Advantage plus DNA subscription). Second, the CLI can show eight network-module interfaces on some IOS XE releases, but only ports 1 through 4 are valid on the C9300-NM-4G.

Compatibility: Where the C9300-NM-4G Fits and Where It Does Not

The C9300-NM-4G fits the single network module slot on Catalyst 9300 modular-uplink models — the C9300-24x and C9300-48x SKUs such as C9300-48P, C9300-48T, C9300-24UX and C9300-48U. It is also backward compatible with the Catalyst 3850 series, which is useful during phased migrations.

It does not fit:

  • Catalyst 9300X models (C9300X-12Y, C9300X-24Y, C9300X-48Y and similar) — these use the C9300X-NM-8X and C9300X-NM-4Y modules
  • Catalyst 9300L and 9300LM models — fixed-uplink hardware with no network module slot

Buying the wrong module for a C9300X chassis is the most common mistake we see with this SKU. Check whether the switch is a C9300-xx or C9300X-xx before ordering — the letter X changes everything.

C9300-NM-4G vs the Other Catalyst 9300 Network Modules

Cisco makes five network modules for the modular-uplink Catalyst 9300. All are field-replaceable, so you can pick the uplink speed your network actually needs and change it later without replacing the switch.

ModulePortsBest forLinkNewNet price (used)
C9300-NM-4G4 x 1G SFP1G fiber/copper uplinks to distribution layer$227
C9300-NM-4M4 x 10G/mGig copperMultigigabit copper uplinks for Wi-Fi 6/6E access$800
C9300-NM-8X8 x 10G SFP+10G uplinks, 80 Gbps aggregate$460
C9300-NM-2Y2 x 25G SFP2825G uplinks for dense aggregation$1,109
C9300-NM-2Q2 x 40G QSFP+40G data center or core-facing uplinks$550

For a deeper dive on the 10G option, see our C9300-NM-8X network module guide.

When the 4G Module Is the Right Choice

The C9300-NM-4G makes sense in three situations:

  1. Your uplinks are still 1G. Many campus access layers run 1G to the distribution switch. Four 1G SFP ports with 1000BASE-LX optics reach up to 10 km over single-mode fiber, which covers most building-to-building runs.
  2. You need copper flexibility. 1000BASE-T copper SFPs let you uplink over existing Cat 5e/6 runs without pulling fiber.
  3. You want the cheapest verified path to modular uplinks. At $227 tested, the 4G is the lowest-cost entry into the Catalyst 9300 uplink module family — and since the slot is field-replaceable, you can migrate to the 8X or 2Y later when your uplink bandwidth grows.

When it is the wrong choice: if your uplinks already run 10G or higher, do not buy the 4G. Step straight to the 8X (10G), 2Y (25G) or 2Q (40G).

Buying a Used C9300-NM-4G: What to Check

The C9300-NM-4G has been in the field for years, which makes the secondary market deep and the pricing attractive — but condition varies. Our checklist:

  • Physical inspection: SFP cage pins and the module edge connector should be straight, with no corrosion on the gold fingers
  • Recognition test: the module should show in show inventory with the correct PID (C9300-NM-4G) on the host switch
  • Port test: all four SFP ports should link up with optics installed and pass traffic
  • Sourcing: buy from a seller that actually tests on real hardware, not one that only seals boxes

Every C9300-NM-4G we ship is tested on a Catalyst 9300 chassis, ships within 24 hours, and carries a 3-month warranty.

C9300-NM-4G FAQ

Does the C9300-NM-4G need a license?

No. The module itself is license-free. The host Catalyst 9300 needs its base Network Essentials or Network Advantage perpetual license, plus the DNA/Essentials or Advantage subscription if you use those features.

Can I use the C9300-NM-4G in a Catalyst 9300X?

No. The C9300X series uses different network modules (C9300X-NM-8X, C9300X-NM-4Y). The C9300-NM-4G is for standard C9300 modular-uplink models only.

What optics work in the C9300-NM-4G?

Any 1G SFP from the Cisco transceiver compatibility matrix: 1000BASE-SX, 1000BASE-LX/LH, EX/EZ for longer reach, and 1000BASE-T copper SFPs for Cat 5e/6 runs.

Is the C9300-NM-4G hot-swappable?

Yes. It installs and removes without powering down the switch, and all forwarding is handled by the host switch's ASIC, so the module adds no extra hop.

How much does a used C9300-NM-4G cost?

Tested used units typically run $200-$260. LinkNewNet lists it at $227 with a 3-month warranty.

Related Blogs

WhatsApp
Quote
Contact
Top