AIR-AP1131G-P-K9 1130G Series Access Points Overview
AIR-AP1131G-P-K9 1130G Series Access Points is a genuine wireless coverage and secure client access product from Cisco, a leading enterprise networking vendor whose Catalyst, Nexus and ISR families power campus, data-center and branch networks worldwide. Belonging to the Cisco family, the AIR-AP1131G-P-K9 unit is built to the original factory specification, so it integrates with existing Cisco deployments predictably and behaves exactly as the platform documentation describes. In the network, it is deployed as a standalone unit or as part of a larger managed network, following the standard operating procedures of the platform.
This unit follows the original factory specification for the Cisco family, covering its intended role without compatibility surprises. Standard mounting, cabling and management practices apply, and it interoperates with surrounding hardware using the same procedures as other Cisco equipment already deployed in the network.
Typical deployments include high-density wireless for offices and halls, branch and remote-site Wi-Fi coverage, and guest networks and IoT onboarding. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “802.11g Integrated Auto AP; Int Antennas; Japan2 Cnfg 1130G Series Access Points”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the AIR-AP1131G-P-K9. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Campus Coverage
High-density wireless for offices and halls.
Branch Wi-Fi
Cost-effective coverage for remote sites.
Guest & IoT
Isolated guest networks and IoT onboarding.
Buying a Pre-Owned AIR-AP1131G-P-K9
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
AIR-AP1131G-P-K9 Specification | ||
Part Number | AIR-AP1131G-P-K9 | |
Product Description | 802.11g Integrated Auto AP; Int Antennas; Japan2 Cnfg 1130G Series Access Points | |
Software | Cisco IOS Software | |
Data Rates Supported | 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps | |
Network Standard | IEEE 802.11b and 802.11g | |
Uplink | Autosensing 802.3 10 and 100BASE-T Ethernet | |
Frequency Band and Operating Channels | Americas (FCC) • 2.412 to 2.462 GHz; 11 channels • ETSI • 2.412 to 2.472 GHz; 13 channels Japan (TELEC) • 2.412 to 2.472 GHz; 13 channels Orthogonal Frequency Division Multiplexing (OFDM) • 2.412 to 2.484 GHz; 14 channels Complementary Code Keying (CCK) • 5.15 to 5.25 GHz; 4 channels Japan-P (TELEC 2 (Japan2) Cnfg) • 2.412 to 2.472 GHz; 13 channels Orthogonal Frequency Division Multiplexing (OFDM) • 2.412 to 2.484 GHz; 14 channels Complementary Code Keying (CCK) • 5.15 to 5.35 GHz, 8 channels Japan-Q • 2.412 to 2.472 GHz; 13 channels Orthogonal Frequency Division Multiplexing (OFDM) • 2.412 to 2.484 GHz; 14 channels Complementary Code Keying (CCK) • 5.15 to 5.35 GHz; 8 channels • 5.470 to 5.725 GHz; 11 channels | |
Nonoverlapping Channels | 802.11b/g: 3 | |
Receive Sensitivity (Typical) | 802.11g: • 1 Mbps: -93 dBm • 2 Mbps: -91 dBm • 5.5 Mbps: -88 dBm • 6 Mbps: -86 dBm • 9 Mbps: -85 dBm • 11 Mbps: -85 dBm • 12 Mbps: -84 dBm • 18 Mbps: -83 dBm • 24 Mbps: -79 dBm • 36 Mbps: -77 dBm • 48 Mbps: -72 dBm • 54 Mbps: -70 dBm | |
Available Transmit Power Settings (Maximum Power Setting Will Vary by Channel and According to Individual Country Regulations) | 802.11b: CCK: • 20 dBm (100 mW) • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12 mW) • 8 dBm (6 mW) • 5 dBm (3 mW) • 2 dBm (2 mW) • -1 dBm (1 mW) | 802.11g: OFDM: • 17 dBm (50 mW) • 14 dBm (25 mW) • 11 dBm (12 mW) • 8 dBm (6 mW) • 5 dBm (3 mW) • 2 dBm (2 mW) • -1 dBm (1 mW)
|
Range | Indoor (Distance Across Open Office Environment): | Outdoor: |
802.11g: • 100 ft (30m) @ 54 Mbps • 175 ft (53m) @ 48 Mbps • 250 ft (76m) @ 36 Mbps • 275 ft (84m) @ 24 Mbps • 325 ft (100m) @ 18 Mbps • 350 ft (107m) @ 12 Mbps • 360 ft (110m) @ 11 Mbps • 375 ft (114m) @ 9 Mbps • 400 ft (122m) @ 6 Mbps • 420 ft (128m) @ 5.5 Mbps • 440 ft (134m) @ 2 Mbps • 450 ft (137m) @ 1 Mbps | 802.11g: • 120 ft (37m) @ 54 Mbps • 350 ft (107m) @ 48 Mbps • 550 ft (168m) @ 36 Mbps • 650 ft (198m) @ 24 Mbps • 750 ft (229m) @ 18 Mbps • 800 ft (244m) @ 12 Mbps • 820 ft (250m) @ 11 Mbps • 875 ft (267m) @ 9 Mbps • 900 ft (274m) @ 6 Mbps • 910 ft (277m) @ 5.5 Mbps • 940 ft (287m) @ 2 Mbps • 950 ft (290m) @ 1 Mbps | |
Ranges and actual throughput vary based upon numerous environmental factors, so individual performance may differ. | ||
Compliance | Standards Safety • UL 60950-1 • CAN/CSA-C22.2 No. 60950-1 • UL 2043 • IEC 60950-1 • EN 60950-1 • NIST FIPS 140-2 level 2 validation Radio Approvals • FCC Part 15.247 • RSS-210 (Canada) • EN 300.328 (Europe) • ARIB-STD 33 (Japan) • ARIB-STD 66 (Japan) • AS/NZS 4268.2003 (Australia and New Zealand) • EMI and Susceptibility (Class B) • FCC Part 15.107 and 15.109 • ICES-003 (Canada) • VCCI (Japan) • EN 301.489-1 and -17 (Europe) Security • 802.11i, WPA2, WPA • 802.1X • AES, TKIP • FIPS 140-2 Pre-Validation List • Common Criteria (when running Cisco IOS Software) Other • IEEE 802.11g • FCC Bulletin OET-65C • RSS-102 | |
Antennas | • 2.4 GHz • Gain: 3.0 dBi • Horizontal beam width: 360° | |
Security | Authentication Security Standards • WPA • WPA2 (802.11i) • Cisco Temporal Key Integrity Protocol (TKIP) • Cisco Message Integrity Check (MIC) • IEEE 802.11 Wired Equivalent Privacy (WEP) keys of 40 and 128 bits 802.1X EAP types: • EAP Flexible Authentication via Secure Tunneling (EAP FAST) • Protected EAP Generic Token Card (PEAP GTC) • PEAP Microsoft Challenge Authentication Protocol Version 2 (PEAP MSCHAP) • EAP Transport Layer Security (EAP TLS) • EAP Tunneled TLS (EAP TTLS) • EAP Subscriber Identity Module (EAP SIM) • Cisco LEAP Encryption • Advanced Encryption Standard Counter Mode with Cipher Block Chaining Message Authentication Code Protocol (AES CCMP) encryption (WPA2) • TKIP (WPA) • Cisco TKIP • WPA TKIP • IEEE 802.11 WEP keys of 40 and 128 bits | |
Status LEDs | External: • Status LED indicates operating state, association status, error or warning condition, boot sequence, and maintenance status Internal: • Ethernet LED indicates status of activity over the Ethernet • Radio LED indicates status of activity over the radios | |
Dimensions (H x W x D) | 7.5 x 7.5 x 1.3 in. (19.1 x 19.1 x 3.3 cm) | |
Weight | 1.5 lb (0.67 kg) | |
Environmental | Operating • Altitude: 0 to 2500m • 32 to 104°F (0 to 40°C) • 10 to 90% humidity (noncondensing) Non Operating • -40 to 158F (-40 to 70C) • Up to 95% humidity (noncondensing) | |
System Memory | • 32 MB RAM • 16 MB flash memory | |
Input Power Requirements | • 100-240 VAC; 50-60 Hz (power supply) • 36-57 VDC (device) | |
Power Draw | 9.91W maximum | |
