Cisco ONE Catalyst 4500 Series Platform C1-C4500X-F-32SFP+ Overview
Cisco ONE Catalyst 4500 Series Platform C1-C4500X-F-32SFP+ is a genuine modular capacity expansion product from Cisco, a leading enterprise networking vendor whose Catalyst, Nexus and ISR families power campus, data-center and branch networks worldwide. Belonging to the Cisco ONE Catalyst 4500 Series family, the C1-C4500X-F-32SFP+ unit is built to the original factory specification, so it integrates with existing Cisco deployments predictably and behaves exactly as the platform documentation describes. In the network, it is installed into a compatible chassis slot, where it works alongside the supervisor and line cards to extend the platform’s capabilities.
From a specification standpoint, it offers 32 ports for client, server or uplink connectivity. These are the original factory figures for this model, giving administrators a clear picture of what the unit can deliver before it enters service. Standard mounting, cabling and management practices apply, so deployment follows the same procedures as other Cisco hardware already running in the environment.
Typical deployments include short-reach data-center interconnects, campus backbone fiber links, and carrier access and metro networks. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “Cisco ONE Catalyst 4500-X 32-Ports RJ-45 Managed Rack-Mountable Layer3 10Gbps Back-to-Front Switch with IP Base 16 x 10Gbit LAN SF”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the C1-C4500X-F-32SFP+. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Capacity Expansion
Add ports and performance to existing chassis.
Upgrade Path
Modernize aging platforms with compatible modules.
Flexible I/O
Mix copper, fiber and high-speed uplinks.
Buying a Pre-Owned C1-C4500X-F-32SFP+
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
C1-C4500X-F-32SFP+ Specification | |
| General | |
| Device Type | Switch - 32 ports |
| Enclosure Type | Rack-mountable |
| Subtype | 10 Gigabit Ethernet |
| Ports | 32 x 1 Gigabit SFP/ 10 Gigabit SFP+ |
| MAC Address Table Size | 55K entries |
| Jumbo Frame Support | 9216 bytes |
| Remote Management Protocol | RMON 1, RMON 2 |
| Features | Layer 2 switching, VLAN support, Access Control List (ACL) support, Quality of Service (QoS), back to front airflow, redundant hot swappable fans |
| Compliant Standards | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s |
| Processor | : 1.5 GHz |
| RAM | 4 GB DDR2 SDRAM |
| Flash Memory | 2 GB (max) |
| Interfaces | 32 x 10Gbit LAN SFP+ ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 1 x USB Type A ¦ 1 x console RJ-45 |
| Expansion Slots | 1 (total) / 1 (free) x SD Memory Card ¦ 1 (total) / 1 (free) x expansion slot |
| Power Device | Internal power supply - hot-plug |
| Power Consumption Operational | 330 Watt |
| Operating Temperature | 32 °F-104 °F |
| Storage Temperature | -40 °F-158 °F |
