Cisco Nexus 7000 Series Fabric Module N77-C7710-FAB-3 Overview
Cisco Nexus 7000 Series Fabric Module N77-C7710-FAB-3 is a genuine modular capacity expansion product from Cisco, a leading enterprise networking vendor whose Catalyst, Nexus and ISR families power campus, data-center and branch networks worldwide. Belonging to the Cisco Nexus 7000 Series family, the N77-C7710-FAB-3 unit is built to the original factory specification, so it integrates with existing Cisco deployments predictably and behaves exactly as the platform documentation describes. In the network, it is installed into a compatible chassis slot, where it works alongside the supervisor and line cards to extend the platform’s capabilities.
This unit follows the original factory specification for the Cisco Nexus 7000 Series family, covering its intended role without compatibility surprises. Standard mounting, cabling and management practices apply, and it interoperates with surrounding hardware using the same procedures as other Cisco equipment already deployed in the network.
Typical deployments include adding ports and performance to existing chassis systems, modernizing legacy platforms with compatible line cards, and mixing copper, fiber and high-speed uplinks in one chassis. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “Cisco Nexus 7000 Series Fabric Module N77-C7710-FAB-3”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the N77-C7710-FAB-3. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Capacity Expansion
Add ports and performance to existing chassis.
Upgrade Path
Modernize aging platforms with compatible modules.
Flexible I/O
Mix copper, fiber and high-speed uplinks.
Buying a Pre-Owned N77-C7710-FAB-3
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
| N77-C7710-FAB-3 | |
| Product list | |
| Product code | N77-C7710-FAB-3 |
| Power cable | No |
| Button | No |
| Product parameters | |
| Software | Cisco NX-OS Software Release 8.3.1 (minimum requirement) |
| Performance | 464 Gbps per slot per Fabric-3 module 2.64 Tbps per slot for an aggregate of six Fabric-3 modules |
| Reliability | Online insertion and retrieval (OIR) hot swappability |
| MIBs | Supports Simple Network Management Protocol Version 1 (SNMPv1, v2c, and v3 (see the Cisco NX-OS Software release notes for details about specific MIB support) |
| Management | Cisco Data Center Network Manager (DCNM) 11.0 or later |
| Interfaces | XML Scriptable command-line interface (CLI) Cisco DCNM web services Python Tool Command Language (TCL) Cisco IOS® Embedded Event Manager (EEM) OpenFlow |
| Introduction | The Cisco Nexus 7700 Switches are an extension to the Cisco Nexus 7000 Series modular switches. With more than 83 Terabits per second (Tbps) of overall switching capacity, the Cisco Nexus 7700 Switches deliver the highest-capacity 10-, 40-, and 100-Gigabit Ethernet ports in the industry, with up to 768 native 10-Gbps ports, 480 40-Gbps ports, or 480 100-Gbps ports. This high-system capacity is designed to meet the scalability requirements of the largest cloud environments. |
| Physical specifications | |
| Width | 45.95 CM |
| Height | 5.13 CM |
| Depth | 23.42 CM |
| Weight | 4.99 KG |
| Product compatibility | |
| Supported | Cisco Nexus 7710 Switch |
N77-C7710-FAB-3 - Module Notes
This N77-C7710-FAB-3 line card/module variant is designed for the chassis slot type and fabric requirements of its platform family. Verify the slot compatibility, supported forwarding modes, and firmware version required for this specific SKU before ordering.
For capacity expansion, confirm the port density, uplink type, and any software feature dependencies of this module. Our team can verify revision levels and platform compatibility before dispatch.
Each N77-C7710-FAB-3 module is inspected, tested and verified for correct operation before leaving our facility, including port status, management access and firmware state.
