FP7020-K9-RF - Cisco FirePOWER 7000 Series Devices Overview
FP7020-K9-RF - Cisco FirePOWER 7000 Series Devices is a genuine modular capacity expansion product from Cisco, a global name in networking whose platforms are used by enterprises, service providers and data-center operators alike. Belonging to the Cisco FirePOWER 7000 Series family, the FP7020-K9-RF unit is built to the original factory specification, so it integrates with existing Cisco deployments predictably and behaves exactly as the platform documentation describes. In the network, it is installed into a compatible chassis slot, where it works alongside the supervisor and line cards to extend the platform’s capabilities.
From a specification standpoint, aggregate capacity of 50 Mbps. These are the original factory figures for this model, giving administrators a clear picture of what the unit can deliver before it enters service. Standard mounting, cabling and management practices apply, so deployment follows the same procedures as other Cisco hardware already running in the environment.
Typical deployments include perimeter protection with stateful inspection, branch-office security with VPN and threat prevention, and data-center north-south traffic filtering. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “Cisco FirePOWER 7020 Chas. 1U. 8 Port Copper REMANUFACTURED”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the FP7020-K9-RF. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Capacity Expansion
Add ports and performance to existing chassis.
Upgrade Path
Modernize aging platforms with compatible modules.
Flexible I/O
Mix copper, fiber and high-speed uplinks.
Buying a Pre-Owned FP7020-K9-RF
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
The Cisco FirePOWER 7000 Series Appliances Product Specifications
Model | 7010 | 7020 | 7030 | 7050 | 7110 | 7115 | 7120 | 7125 |
Performance and Functionality | ||||||||
IPS Throughput* | 50 Mbps | 100 Mbps | 250 Mbps | 500 Mbps | 500 Mbps | 750 Mbps | 1 Gbps | 1.25 Gbps |
Modular Interfaces | No | No | No | No | No | Yes - 8 SFP sockets | No | Yes - 8 SFP sockets |
Monitoring Interfaces | (8) 1-Gbps copper | (8) 1-Gbps copper | (8) 1-Gbps copper | (8) 1-Gbps copper | (8) 1-Gbps copper; (8) 1-Gbps short-range fiber s | (12) total - (4) 1-Gbps copper; (8) SFP sockets | (8) 1-Gbps copper; (8) 1-Gbps short-range fiber | (12) total - (4) 1-Gbps copper; (8) SFP sockets |
Programmable Fail-Open Interfaces | Yes | Yes | Yes | Yes | Yes | Yes; (4) | Yes | Yes; (4) |
Management Interfaces | RJ45 | RJ45 | RJ45 | RJ45 | RJ45 | RJ45 | RJ45 | RJ45 |
Management Interface Speed | 10/100/1000 | 10/100/1000 | 10/100/1000 | 10/100/1000 | 10/100/1000 | 10/100/1000 | 10/100/1000 | 10/100/1000 |
Typical Latency | < 150 microseconds | < 150 microseconds | < 150 microseconds | < 150 microseconds | < 150 microseconds | < 150 microseconds | < 150 microseconds | < 150 microseconds |
Memory (RAM) | 4 GB | 4 GB | 4 GB | 4 GB | 16 GB | 16 GB | 16 GB | 16 GB |
Lights-Out Management | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Stackable | No | No | No | No | No | No | No | No |
Dual Power Supplies | No | No | No | No | Yes | Yes | Yes | Yes |
* Exact network performance experienced will vary depending on conditions outside of the control of Cisco, including the protocol mix and average packet size inspected.
FP7020-K9-RF - Product Notes
This listing is a specific SKU variant of the FP7020-K9-RF family. Review the specifications above and confirm compatibility with your existing infrastructure, including software version, mounting, and interface requirements, before ordering.
For volume requirements we offer configuration checks and staged delivery options. Our team can confirm revision levels, software compatibility, and lead time before you place an order.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation.
FP7020-K9-RF - Cisco Series Notes
This listing is part of the Cisco enterprise networking product family, sourced and tested by LinkNewNet for enterprise deployment. Cisco firewall provides stateful inspection, VPN termination, and threat defense at the network perimeter. It is commonly deployed in internet-edge, site-to-site, and remote-access roles.
Deployment guidance: When planning this FP7020-K9-RF unit into a network, confirm the software image (IOS/IOS-XE/NX-OS) required, the power and cooling profile, and the upstream/downstream interface types that match your existing infrastructure. For a like-for-like refresh, match the feature set of the units already in service so management and automation behave consistently.
Our Cisco reconditioning process: Every pre-owned Cisco unit at LinkNewNet passes a documented reconditioning flow before dispatch - visual inspection, internal cleaning, firmware verification, port-by-port testing, and configuration reset to factory defaults. This ensures the unit you receive operates reliably and integrates cleanly with your existing Cisco management tools.
Related models in this family: FP7120-K9-RF, FP7110-K9-RF, FP7110-K9, FP7125-K9, FP7050-K9-RF. Compare specifications to confirm the right port density, feature set and uplink options for your deployment.
Model code: F = Fiber interface / F regulatory domain - this suffix indicates the feature set, power, or regulatory variant of the FP7020-K9-RF, which affects software licensing and regional compliance.
