H3C Switch LS 5130-52S-PWR-EI Overview
H3C Switch LS 5130-52S-PWR-EI is a genuine network infrastructure product from H3C, a major enterprise networking vendor with strong presence in campus, data-center and carrier deployments. Belonging to the H3C family, the 5130-52S-PWR-EI unit is built to the original factory specification, so it integrates with existing H3C deployments predictably and behaves exactly as the platform documentation describes. In the network, it is deployed as a standalone unit or as part of a larger managed network, following the standard operating procedures of the platform.
From a specification standpoint, it offers 52 ports for client, server or uplink connectivity; packet forwarding up to 132 Mpps. These are the original factory figures for this model, giving administrators a clear picture of what the unit can deliver before it enters service. Standard mounting, cabling and management practices apply, so deployment follows the same procedures as other H3C hardware already running in the environment.
Typical deployments include general network infrastructure support, general network infrastructure support, and general network infrastructure support. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “H3CSwitch LS 5130-52S-PWR-EI”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the 5130-52S-PWR-EI. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Enterprise Campus
High-density ports power users, phones and APs at the access layer.
Branch Office
Stackable units simplify branch deployment and management.
Wireless & IoT
PoE budget supports dense wireless and IoT endpoints.
Buying a Pre-Owned 5130-52S-PWR-EI
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
| 5130-52S-PWR-EI | |
| Product list | |
| Product code | 5130-52S-PWR-EI |
| Type | Switch |
| Product parameters | |
| Network Ports | 52 |
Backplane bandwidth | 256Gbps |
Packet forwarding rate | 132Mpps |
| Port Description | 48×10/100/1000Base-T electrical ports 4×10G BASE-X SFP+ 10GbE optical port |
VLAN | Port-based VLAN support, MAC-based VLAN support, protocol-based VLAN support, QinQ support, flexible QinQ, VLAN Mapping support, Voice VLAN support, GVRP support |
| QOS | Supports limiting the rate at which the port receives and sends messages, message redirection, CAR (Committed Access Rate), 8 output queues per port, port queue scheduling (SP, WRR, SP+WRR), 802.1p and DSCP priority re-tagging of messages |
| Network Management | Support XModem/FTP/TFTP loading upgrade, support Command Line Interface (CLI), Telnet, Console port for configuration, support SNMPv1/v2/v3, WEB network management, support RMON alarm, event, history, support iMC intelligent management centre, support system log, hierarchical alarm, debug information output, support HGMPv2, NTP, Ping, Tracert, VCT cable detection, DLDP unidirectional link detection protocol, Loopback-detection port loopback detection, power, fan and temperature alarms, BFD, H3C UIS Manager unified management software, which can provide cross-server It can provide fully converged management across servers, storage, network and virtualization, simplifying deployment and installation and optimizing operation and maintenance management. |
| Temperature/humidity requirements | |
| Working condition | o℃ to 45℃ (32℉ to 113℉) |
| ldle condition | -40℃ to +70℃ (-40℉ to +158℉) |
| Physical specifications | |
| Width | 17.17 in |
| Height | 27.87 in |
| Depth | 16.54 in |
