H3C WA6320 Series Access Point H3C WA6320 Overview
H3C WA6320 Series Access Point H3C WA6320 is a genuine network infrastructure product from H3C, a major enterprise networking vendor with strong presence in campus, data-center and carrier deployments. Belonging to the H3C WA6320 Series family, the WA6320 unit is built to the original factory specification, so it integrates with existing H3C deployments predictably and behaves exactly as the platform documentation describes. In the network, it is deployed as a standalone unit or as part of a larger managed network, following the standard operating procedures of the platform.
This unit follows the original factory specification for the H3C WA6320 Series family, covering its intended role without compatibility surprises. Standard mounting, cabling and management practices apply, and it interoperates with surrounding hardware using the same procedures as other H3C equipment already deployed in the network.
Typical deployments include general network infrastructure support, general network infrastructure support, and general network infrastructure support. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “H3C WA6320 New Generation 802.11ax Indoor AP WA6320”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the WA6320. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Campus Coverage
High-density wireless for offices and halls.
Branch Wi-Fi
Cost-effective coverage for remote sites.
Guest & IoT
Isolated guest networks and IoT onboarding.
Buying a Pre-Owned WA6320
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
| WA6320 | |
| Product list | |
| Product code | WA6320 |
| Power cable | No |
| Button | No |
| Product parameters | |
| Console port | Rj45 |
| Built-in antenna | Built-in omni-directional antenna 3dBi antenna gain @2.4GHz 5dBi antenna gain @5GHz |
| Working frequencies | 802.11ax/ac/n/a : 5.725GHz-5.850GHz ; 5.47～5.725GHz; 5.15~5.35GHz 802.11ax/b/g/n : 2.4GHz-2.483GHz |
| Modulation technology | OFDM : BPSK@6/9Mbps、QPSK@12/18Mbps、16-QAM@24Mbps、64-QAM@48/54Mbps DSSS :DBPSK@1Mbps、DQPSK@2Mbps、CCK@5.5/11Mbps(file://dbpsk@1mbps、dqpsk@2mbps、cck@5.5/11Mbps) MIMO-OFDM （11n）: MCS 0-31 MIMO-OFDM （11ac）: MCS 0-11 MIMO-OFDM （11ax）: MCS 0-11 |
| Modulation mode | 11b：DSS:CCK@5.5/11Mbps,DQPSK@2Mbps,DBPSK@1Mbps 11a/g：OFDM:64QAM@48/54Mbps,16QAM@24Mbps,QPSK@12/18Mbps,BPSK@6/9Mbps 11n：MIMO-OFDM:BPSK,QPSK,16QAM,64QAM 11ac：MIMO-OFDM:BPSK,QPSK,16QAM,64QAM,256QAM 11ax: MIMO-OFDM: BPSK,QPSK,16QAM,64QAM,256QAM,1024QAM |
| MTBF | >250000H |
| Protection class | IP41 |
| Introduction | H3C WA6320 series access point is the latest generation wireless access point developed based on 802.11ax standard. They are designed with creative dual-radio 802.11ax technology standard respectively, and provide a transmission speed at least 2 times faster than 802.11ac products. This makes the series suitable for high-density access scenarios, such as hotel, retail stores and smart enterprise campus. It is compact in appearance and support both wall mounting and ceiling mounting. |
| Physical specifications | |
| HxWxD | 185mm×185mm×43mm |
| Weight | 0.4 kg |
| Environmental Parameters | |
| Min Temperature | 23 °F |
| Max Temperature | 131 °F |
| Humidity Operating | 5 - 95% (non-condensing) |
WA6320 - Variant Notes
This listing is a specific variant of the WA6320 family. Review the specifications above and confirm compatibility with your controller platform and firmware release before ordering.
This SKU is a multi-unit bundle (approximately 632 units), providing an economical option for deploying coverage across multiple floors, offices, or sites at once. Each unit in the bundle shares the same hardware and software baseline as the single-unit SKUs.
When selecting between variants of the WA6320 family, compare the regulatory domain, bundled accessories, and total cost of ownership. For a like-for-like refresh of an existing deployment, match the variant of the units already in service so channel and power settings remain consistent across the network.
WA6320 Quick Specifications
| Model | WA6320 |
| Product Type | WA6320 |
| Form Factor | AP |
| Series Profile | an 802.11ax (Wi-Fi 6) indoor access point |
WA6320 Deployment Scenarios
The WA6320 is an 802.11ax (Wi-Fi 6) indoor access point. In practice, this positions it for wireless coverage: it is deployed for delivering high-density Wi-Fi 6 client access for offices and halls. Administrators typically choose this model when their network needs WA6320 and they want a unit whose port layout and feature set match the role without overspending. It is commonly sourced for refresh programs, capacity expansion and spares management, and it integrates with the rest of the H3C fleet using the same management tools and CLI conventions.
H3C Reconditioning & Warranty
Every H3C unit at LinkNewNet goes through a dedicated reconditioning flow: hardware inspection, port-level testing, and verification of the Comware software state on supported models. Units are cleaned, graded and repackaged, and serialized records are kept so you can confirm what was tested. Each unit ships with warranty coverage and access to our technical support team; for H3C-specific questions about IRF stacking, Comware versions or port configuration we can confirm details before you order. Volume and project pricing is available on request.
