Juniper EX-XFP-10GE80KDWDM Switches Overview
Juniper EX-XFP-10GE80KDWDM Switches is a genuine fiber-optic connectivity product from Juniper, a specialist in high-performance routing and switching, trusted in service-provider and large-enterprise networks. Belonging to the Juniper family, the Juniper EX-XFP-10GE80KDWDM unit is built to the original factory specification, so it integrates with existing Juniper deployments predictably and behaves exactly as the platform documentation describes. In the network, it is deployed as a standalone unit or as part of a larger managed network, following the standard operating procedures of the platform.
This unit follows the original factory specification for the Juniper family, covering its intended role without compatibility surprises. Standard mounting, cabling and management practices apply, and it interoperates with surrounding hardware using the same procedures as other Juniper equipment already deployed in the network.
Typical deployments include short-reach data-center interconnects, campus backbone fiber links, and carrier access and metro networks. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “10GE DWDM XFP, Tunable Across C-band 50 Ghz Channel Spacing (compliant with ITU-T G.698.1) for 80 km Transmission on SMF”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the Juniper EX-XFP-10GE80KDWDM. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Enterprise Campus
High-density ports power users, phones and APs at the access layer.
Branch Office
Stackable units simplify branch deployment and management.
Wireless & IoT
PoE budget supports dense wireless and IoT endpoints.
Buying a Pre-Owned Juniper EX-XFP-10GE80KDWDM
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
Juniper EX-XFP-10GE80KDWDM Specifications | |
| Brand | Juniper |
| Model | EX-XFP-10GE80KDWDM |
| Product Type | 10GE DWDM XFP |
| Transmission Distance | 80 km |
| Frequency Range | Tunable Across C-band |
| Channel Spacing | 50 GHz |
| ITU-T Compliance | G.698.1 |
| Form Factor | XFP |
| Data Rate | 10 Gbps |
| Wavelength | DWDM Tunable |
| Connector Type | LC |
| Cable Type | SMF (Single-Mode Fiber) |
| Reach | Up to 80 km |
| Operating Temperature | 0��C to 70��C |
| Storage Temperature | -40��C to 85��C |
| Humidity | 5% to 95% non-condensing |
| Power Supply | 3.3V |
| Power Consumption | Max 3.5W |
| Compliance | Class 1 Laser Safety per FDA/CDRH and IEC-60825 standards |
| MIB Support | Yes |
| Hot Swappable | Yes |
| Warranty | 1 Year |
Juniper EX-XFP-10GE80KDWDM - Compatibility Notes
This Juniper EX-XFP-10GE80KDWDM transceiver/module variant is specified for the reach, wavelength, and form factor indicated in the specifications above. Confirm compatibility with your switch or router platform, including the required coding (Cisco, Juniper, Huawei, H3C) and supported data rate, before ordering.
When building out or refreshing links, match the transceiver variant to the optics budget and distance of each run. Our team can confirm compatibility with specific platforms and provide bulk pricing.
Each Juniper EX-XFP-10GE80KDWDM unit is tested for correct operation and performance before dispatch, ensuring reliable link establishment on arrival.
