Juniper QFX10000-30C-M Switches Overview
Juniper QFX10000-30C-M Switches is a genuine data-center switching fabric product from Juniper, a vendor known for scalable, high-performance networking platforms from the campus edge to the core. Belonging to the Juniper family, the Juniper QFX10000-30C-M unit is built to the original factory specification, so it integrates with existing Juniper deployments predictably and behaves exactly as the platform documentation describes. In the network, it is built for high-density data-center and cloud environments, where low latency, high availability and consistent forwarding matter most.
From a specification standpoint, it offers 30 ports for client, server or uplink connectivity. These are the original factory figures for this model, giving administrators a clear picture of what the unit can deliver before it enters service. Standard mounting, cabling and management practices apply, so deployment follows the same procedures as other Juniper hardware already running in the environment.
Typical deployments include access-layer deployments for user, phone and AP connectivity, distribution and core aggregation in campus networks, and top-of-rack and end-of-row switching in data centers. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “QFX10000 30-port 100G QSFP28 / 40G QSFP+ MACsec line card”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the Juniper QFX10000-30C-M. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Enterprise Campus
High-density ports power users, phones and APs at the access layer.
Branch Office
Stackable units simplify branch deployment and management.
Wireless & IoT
PoE budget supports dense wireless and IoT endpoints.
Buying a Pre-Owned Juniper QFX10000-30C-M
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
Juniper QFX10000-30C-M Specifications | |
| Product Name | Juniper QFX10000-30C-M |
| Product Type | 30-port 100G QSFP28 / 40G QSFP+ MACsec line card |
| Compatible With | Juniper QFX10000 Series Switches |
| Ports | 30 x 100G QSFP28 / 40G QSFP+ |
| Security Protocol | MACsec |
| Encryption | Supports IEEE 802.1AE MACsec Encryption |
| Throughput | Up to 3 Tbps per slot (bidirectional) |
| Form Factor | Line Card |
| Switching Engine Model | Integrated on QFX10000 series |
| Optical Interconnect | QSFP28 & QSFP+ |
| Data Rate | 40Gbps & 100Gbps |
| Power Consumption | Low power consumption design |
| Programming Interface | JUNOS OS |
| Quality of Service (QoS) | Advanced QoS features for traffic management |
| Network Virtualization | Supports VXLAN and EVPN |
| Virtual Chassis Support | Yes |
| Scalability | Highly scalable for cloud, data center, and enterprise |
| High Availability | Designed for high availability and n+1 redundancy |
| Operating Temperature | 0��C to 40��C |
| Compliance | Meets relevant industry standards for networking equipment |
| Management | Managed via Juniper Networks Junos Space and CLI |
Juniper QFX10000-30C-M - Deployment Notes
This Juniper QFX10000-30C-M switch is suited to wiring-closet, distribution, or core roles depending on the port density and uplink options of the specific model. The port configuration is a key consideration when planning power budgets for attached devices such as IP phones and access points.
For a refresh or expansion, confirm the IOS/NX-OS software release supported by this specific SKU, the fan and power requirements, and the uplink modules that match your existing infrastructure. Our team can verify revision levels and software compatibility before you order.
Every unit at LinkNewNet is inspected and tested before dispatch, and this Juniper QFX10000-30C-M variant is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Volume requirements can be staged with configuration checks.
