Juniper QFX5110-32Q-DC-AFI Overview
Juniper QFX5110-32Q-DC-AFI is a genuine data-center switching fabric product from Juniper, a vendor known for scalable, high-performance networking platforms from the campus edge to the core. Belonging to the Juniper family, the QFX5110-32Q-DC-AFI unit is built to the original factory specification, so it integrates with existing Juniper deployments predictably and behaves exactly as the platform documentation describes. In the network, it is built for high-density data-center and cloud environments, where low latency, high availability and consistent forwarding matter most.
From a specification standpoint, it offers 32 ports for client, server or uplink connectivity. These are the original factory figures for this model, giving administrators a clear picture of what the unit can deliver before it enters service. Standard mounting, cabling and management practices apply, so deployment follows the same procedures as other Juniper hardware already running in the environment.
Typical deployments include access-layer deployments for user, phone and AP connectivity, distribution and core aggregation in campus networks, and top-of-rack and end-of-row switching in data centers. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “QFX5110”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the QFX5110-32Q-DC-AFI. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Enterprise Campus
High-density ports power users, phones and APs at the access layer.
Branch Office
Stackable units simplify branch deployment and management.
Wireless & IoT
PoE budget supports dense wireless and IoT endpoints.
Buying a Pre-Owned QFX5110-32Q-DC-AFI
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
QFX5110-32Q-DC-AFI Specifications | |
| Brand | Juniper |
| Model | QFX5110-32Q-DC-AFI |
| Form Factor | 1U |
| Interfaces | 32x 40GbE QSFP+ |
| Switching Capacity | 2.56 Tbps |
| Forwarding Rate | 1.44 Bpps |
| Airflow | Front-to-Back |
| Power Supply | DC |
| Max Power Consumption | 350W |
| Cooling | 4 Hot-swappable Fan Modules |
| CPU | Intel Quad Core 1.7 GHz |
| Memory | 16 GB RAM |
| Storage | 32 GB SSD |
| VLAN IDs Supported | 4094 |
| MAC Addresses | 288K |
| IPv4 Routes | 320K |
| IPv6 Routes | 160K |
| Jumbo Frames | 9216 bytes |
| QoS | 8 Queues per Port |
| Spanning Tree Protocol | 802.1D, 802.1w, 802.1s |
| Dimensions | 1.72 x 17.5 x 21.5 in (4.36 x 44.46 x 54.61 cm) |
QFX5110-32Q-DC-AFI - Deployment Notes
This QFX5110-32Q-DC-AFI switch is suited to wiring-closet, distribution, or core roles depending on the port density and uplink options of the specific model. The port configuration is a key consideration when planning power budgets for attached devices such as IP phones and access points.
For a refresh or expansion, confirm the IOS/NX-OS software release supported by this specific SKU, the fan and power requirements, and the uplink modules that match your existing infrastructure. Our team can verify revision levels and software compatibility before you order.
Every unit at LinkNewNet is inspected and tested before dispatch, and this QFX5110-32Q-DC-AFI variant is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Volume requirements can be staged with configuration checks.
