SPA-1XOC12-POS= - Cisco Catalyst 7600 Series Port Adapter Overview
SPA-1XOC12-POS= - Cisco Catalyst 7600 Series Port Adapter is a genuine modular capacity expansion product from Cisco, a leading enterprise networking vendor whose Catalyst, Nexus and ISR families power campus, data-center and branch networks worldwide. Belonging to the Cisco Catalyst 7600 Series family, the SPA-1XOC12-POS= unit is built to the original factory specification, so it integrates with existing Cisco deployments predictably and behaves exactly as the platform documentation describes. In the network, it is deployed as a standalone unit or as part of a larger managed network, following the standard operating procedures of the platform.
This unit follows the original factory specification for the Cisco Catalyst 7600 Series family, covering its intended role without compatibility surprises. Standard mounting, cabling and management practices apply, and it interoperates with surrounding hardware using the same procedures as other Cisco equipment already deployed in the network.
Typical deployments include adding ports and performance to existing chassis systems, modernizing legacy platforms with compatible line cards, and mixing copper, fiber and high-speed uplinks in one chassis. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “Cisco 7600 1-port OC12/STM4 POS Shared Port Adapters”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the SPA-1XOC12-POS=. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Enterprise Campus
High-density ports power users, phones and APs at the access layer.
Branch Office
Stackable units simplify branch deployment and management.
Wireless & IoT
PoE budget supports dense wireless and IoT endpoints.
Buying a Pre-Owned SPA-1XOC12-POS=
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
SPA-1XOC12-POS= (USED) Specifications | |
| Model | SPA-1XOC12-POS= |
| Port Type | 1-port OC12/STM4 POS |
| Compatibility | Cisco 7600 Series Routers |
| Data Rate | 622 Mbps |
| Interface | POS (Packet over SONET/SDH) |
| Slot Requirement | Shared Port Adapter slot |
| Protocol | ATM, PPP, Cisco HDLC |
| Maximum Power Consumption | 15W |
| Operating Temperature Range | 0°C to 40°C |
| Storage Temperature Range | -40°C to 70°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Dimensions (H x W x D) | 1.56 x 6.75 x 8.00 inches |
| Optical WaveLength | 1310 nm (TX), 1550 nm (RX) |
| Connectors | SC-type |
| Data Transfer Mode | Full Duplex |
| Chassis Compatibility | Cisco 7600-S and Cisco 7603 |
| MTBF | 200,000 hours |
| User Interface | Command Line Interface (CLI) |
SPA-1XOC12-POS= - Deployment Notes
This SPA-1XOC12-POS= security appliance is positioned for the throughput and VPN requirements of its specific SKU tier. Confirm the firewall throughput, VPN tunnel capacity, and interface configuration of this variant against your expected traffic profile before ordering.
For refresh or migration projects, verify the software version and license entitlements applicable to this unit. Our team can confirm the installed software and hardware revision before dispatch.
Every SPA-1XOC12-POS= unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including interface status, console access and firmware state.
SPA-1XOC12-POS= - Cisco Series Notes
This listing is part of the Cisco enterprise networking product family, sourced and tested by LinkNewNet for enterprise deployment. Cisco module/line card expands the capability of a chassis platform, adding interface density, forwarding capacity, or service features. It is installed in a matching chassis slot and managed as part of the parent platform.
Deployment guidance: When planning this SPA-1XOC12-POS= unit into a network, confirm the software image (IOS/IOS-XE/NX-OS) required, the power and cooling profile, and the upstream/downstream interface types that match your existing infrastructure. For a like-for-like refresh, match the feature set of the units already in service so management and automation behave consistently.
Our Cisco reconditioning process: Every pre-owned Cisco unit at LinkNewNet passes a documented reconditioning flow before dispatch - visual inspection, internal cleaning, firmware verification, port-by-port testing, and configuration reset to factory defaults. This ensures the unit you receive operates reliably and integrates cleanly with your existing Cisco management tools.
Related models in this family: 76-ES+XC-20G3C, 7600-ES20-10G3C, RSP720-3CXL-10GE, SPA-1X10GE-L-V2, 7600-ES20-GE3C. Compare specifications to confirm the right port density, feature set and uplink options for your deployment.
