Huawei CloudEngine 12800 Series Switches CE12808SA-BB Overview
Huawei CloudEngine 12800 Series Switches CE12808SA-BB is a genuine data-center switching fabric product from Huawei, a worldwide ICT vendor with a strong portfolio of enterprise switches, routers and data-center hardware. Belonging to the Huawei CloudEngine 12800 Series family, the CE12808SA-BB unit is built to the original factory specification, so it integrates with existing Huawei deployments predictably and behaves exactly as the platform documentation describes. In the network, it is built for high-density data-center and cloud environments, where low latency, high availability and consistent forwarding matter most.
This unit follows the original factory specification for the Huawei CloudEngine 12800 Series family, covering its intended role without compatibility surprises. Standard mounting, cabling and management practices apply, and it interoperates with surrounding hardware using the same procedures as other Huawei equipment already deployed in the network.
Typical deployments include access-layer deployments for user, phone and AP connectivity, distribution and core aggregation in campus networks, and top-of-rack and end-of-row switching in data centers. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “Huawei CE12808S Bundle B (Assembly Chassis,2*MPUA-S,4*SFUC-S,2*PHD-3000WA,2*CE-L24LQ-EC1,OS)”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the CE12808SA-BB. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Enterprise Campus
High-density ports power users, phones and APs at the access layer.
Branch Office
Stackable units simplify branch deployment and management.
Wireless & IoT
PoE budget supports dense wireless and IoT endpoints.
Buying a Pre-Owned CE12808SA-BB
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
CE12808SA-BB Specifications | |
Switching Capacity | 89/ |
Forwarding Rate | 34,560 |
Service Slots | 8 |
Switching Fabric | 4 |
Fabric Architecture | Clos architecture, cell switching, VoQ, and distributed large buffer |
Airflow Design | Strict front-to-back |
Device Virtualization | Virtual System (VS) |
Cluster Switch System (CSS)2 | |
Super Virtual Fabric (SVF)3 | |
Network Virtualization | M-LAG |
TRILL | |
VxLAN routing and bridging | |
EVPN | |
QinQ in VXLAN | |
VM Awareness | Agile Controller |
Network Convergence | FCoE |
DCBX, PFC, and ETS | |
Data Center Interconnect | BGP-EVPN |
Ethernet Virtual Network (EVN) for inter-DC Layer 2 network interconnections | |
Programmability | OpenFlow |
ENP programming | |
OPS programming | |
Puppet, Ansible, and OVSDB plug-ins released on open source websites | |
Linux container for open source and customization programming | |
Traffic Analysis | NetStream |
Hardware-based sFlow | |
VLAN | Adding access, trunk, and hybrid interfaces to VLANs |
Default VLAN | |
QinQ | |
MUX VLAN | |
GVRP | |
MAC Address | Dynamic learning and aging of MAC addresses |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
MAC address limiting based on ports and VLANs | |
IP Routing | IPv4 routing protocols, such as RIP, OSPF, IS-IS, and BGP |
IPv6 routing protocols, such as RIPng, OSPFv3, ISISv6, and BGP4+ | |
IP packet fragmentation and reassembling | |
IPv6 | IPv6 over VXLAN |
IPv6 over IPv4 | |
IPv6 Neighbor Discovery (ND) | |
Path MTU Discovery (PMTU) | |
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 | |
QoS | Traffic classification based on Layer 2, Layer 3, Layer 4, and priority information |
Actions include ACL, CAR, and re-marking | |
Queue scheduling modes such as PQ, WFQ, and PQ + WRR | |
Congestion avoidance mechanisms, including WRED and tail drop | |
Traffic shaping | |
O&M | IEEE 1588v2 |
Packet Conservation Algorithm for Internet (iPCA) | |
Dynamic Load Balancing (DLB) | |
Dynamic Packet Prioritization (DPP) | |
Network-wide path detection | |
Microsecond-level buffer detection | |
Configuration | Console, Telnet, and SSH terminals |
Network management protocols, such as SNMPv1/v2c/v3 | |
File upload and download through FTP and TFTP | |
BootROM upgrade and remote upgrade | |
Hot patches | |
User operation logs | |
Zero-Touch Provisioning (ZTP) | |
Security | 802.1x authentication |
RADIUS and HWTACACS authentication for login users | |
Command line authority control based on user levels, preventing unauthorized users from using commands | |
Defense against MAC address attacks, broadcast storms, and heavy-traffic attacks | |
Ping and traceroute | |
Remote Network Monitoring (RMON) | |
Dimensions | 442 x |
Chassis Weight (empty) | < 100 kg |
Operating Voltage | AC: 90V to 290V |
Max. Power Supply | 12,000W |
