Huawei CloudEngine 5800 Series Switches CE5855-EI-F-B01 Overview
Huawei CloudEngine 5800 Series Switches CE5855-EI-F-B01 is a genuine data-center switching fabric product from Huawei, a worldwide ICT vendor with a strong portfolio of enterprise switches, routers and data-center hardware. Belonging to the Huawei CloudEngine 5800 Series family, the CE5855-EI-F-B01 unit is built to the original factory specification, so it integrates with existing Huawei deployments predictably and behaves exactly as the platform documentation describes. In the network, it is built for high-density data-center and cloud environments, where low latency, high availability and consistent forwarding matter most.
From a specification standpoint, it offers 24 ports for client, server or uplink connectivity; packet forwarding up to 215 Mpps. These are the original factory figures for this model, giving administrators a clear picture of what the unit can deliver before it enters service. Standard mounting, cabling and management practices apply, so deployment follows the same procedures as other Huawei hardware already running in the environment.
Typical deployments include access-layer deployments for user, phone and AP connectivity, distribution and core aggregation in campus networks, and top-of-rack and end-of-row switching in data centers. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “Huawei CE5855-24T4S2Q-EI Switch(24-Port GE RJ45,4-Port 10G SFP+,2-Port 40G QSFP+,2*AC Power Module,2*FAN Box,Port-side Exhaust)”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the CE5855-EI-F-B01. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Enterprise Campus
High-density ports power users, phones and APs at the access layer.
Branch Office
Stackable units simplify branch deployment and management.
Wireless & IoT
PoE budget supports dense wireless and IoT endpoints.
Buying a Pre-Owned CE5855-EI-F-B01
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
CE5855-EI-F-B01 Specifications | |
Base-T Ports | 24 |
SFP+ Ports | 4 |
QSFP+ Ports | 2 |
Switching Capacity | 288 Gbit/s |
Forwarding Rates | 215 Mpps |
Airflow Design | Front-to-back or back-to-front |
Device Virtualization | iStack |
Super Virtual Fabric (SVF) | |
Network Virtualization | M-LAG |
TRILL (CE5855 & CE5850) | |
Programmability | Open Programmability System (OPS) |
Traffic Analysis | NetStream |
sFlow | |
VLAN | Adding access, trunk, and hybrid interfaces to VLANs |
Default VLAN | |
QinQ | |
MUX VLAN | |
GVRP | |
ACL | ingress: 4.5k |
MAC Address Table | maximum: 64k |
Dynamic learning and aging of MAC addresses | |
Static, dynamic, and black hole MAC address entries | |
Packet filtering based on source MAC addresses | |
MAC address limiting based on ports and VLANs | |
ARP (maximum) | 54k |
ND (Maximum) | 16k |
IPv4 FIB (maximum) | 32k |
IP Routing | IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ | |
IPv6 FIB (maximum) | 16k |
IPv6 | IPv6 Neighbor Discovery (ND) |
Path MTU Discovery (PMTU) | |
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 | |
Multicast FIB (maximum) | 2k |
Multicast | IGMP, PIM-SM, PIM-DM, MSDP, and MBGP |
IGMP snooping | |
Fast leave of multicast member interfaces | |
Multicast traffic suppression | |
Multicast VLAN | |
Reliability | LACP |
STP, RSTP, VBST, MSTP | |
BPDU protection, root protection, and loop protection | |
Smart Link and multi-instance | |
DLDP | |
ERPS (G.8032) | |
VRRP, VRRP load balancing, and BFD for VRRP | |
BFD for BGP/IS-IS/OSPF/Static route | |
QoS | Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
Actions of ACL, CAR, re-marking, and scheduling | |
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR | |
Congestion avoidance mechanisms, including WRED and tail drop | |
Traffic shaping | |
Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm |
Weight (fully loaded) | 8.1 kg (17.8 lb) |
