Juniper QFX5100-48SH-AFI Specifications |
Type | Switch - 48 ports - L3 - Managed |
Part Number | QFX5100-48SH-AFI |
Enclosure Type | Rack-mountable 1U |
Performance | Switching capacity: 2.56 Tbps |
Throughput | 1.44 Bpps |
Ports | 48 x 10 Gigabit SFP+ / 40 Gigabit QSFP+ |
MAC Address Table Size | 288K entries |
Jumbo Frame Support | Yes |
Routing Protocol | BGP, OSPF, RIP-1, RIP-2, IGMPv2, IGMP, VRRP, PIM-SM, PIM-DM, OSPFv3, PIM-SSM, MSDP |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, CLI |
Features | Layer 3 switching, layer 2 switching, DHCP support, VPN support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, firmware upgradable, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, STP Root Guard, Uni-Directional Link Detection (UDLD), LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), Port Security, IPFIX |
Compliance Standards | IEEE 802.1Q, IEEE 802.3ad (LACP), IEEE 802.1ab (LLDP), IEEE 802.1p, IEEE 802.3x, IEEE 802.3ae, IEEE 802.1ak, IEEE 802.1ae, IEEE 802.1X, IEEE 802.3ba |
Power Over Ethernet (PoE) | N/A |
Power Supply | 1 (install) / 2 (max) - hot-swap |
Software Included | Not included - requires separate purchase |
Dimensions (WxDxH) | 17.4 in x 20.5 in x 1.7 in |
Temperature Range | Operating: 32��F to 104��F / Storage: -40��F to 158��F |
Humidity Range | Operating: 10 to 85% (non-condensing) / Storage: 5 to 95% (non-condensing) |
Airflow Direction | Airflow In (Front-to-Back) |
Supported Protocols | IPv4, IPv6, MPLS |
Security Features | 802.1x, RADIUS, TACACS+, SSL, SSHv2, IPsec, AAA |
Warranty | Limited lifetime warranty |