Nexus 7000 F2-Series Module N7K-F248XP-25 Overview
Nexus 7000 F2-Series Module N7K-F248XP-25 is a genuine modular capacity expansion product from Cisco, a leading enterprise networking vendor whose Catalyst, Nexus and ISR families power campus, data-center and branch networks worldwide. Belonging to the Cisco family, the N7K-F248XP-25 unit is built to the original factory specification, so it integrates with existing Cisco deployments predictably and behaves exactly as the platform documentation describes. In the network, it is installed into a compatible chassis slot, where it works alongside the supervisor and line cards to extend the platform’s capabilities.
This unit follows the original factory specification for the Cisco family, covering its intended role without compatibility surprises. Standard mounting, cabling and management practices apply, and it interoperates with surrounding hardware using the same procedures as other Cisco equipment already deployed in the network.
Typical deployments include adding ports and performance to existing chassis systems, modernizing legacy platforms with compatible line cards, and mixing copper, fiber and high-speed uplinks in one chassis. Organizations commonly source it for refresh programs, capacity expansion and spares management, keeping a tested unit on hand so outages stay short and replacements are predictable. The factory detail for this unit reads: “Nexus 7000 F2-Series 48 Port 10GbE (req. SFP+)”. This makes it a practical choice when original-spec hardware is required at a predictable cost.
Every unit at LinkNewNet is inspected and tested before dispatch, and stock is graded, cleaned and verified for correct operation, including port status, console access and firmware state. Our warranty coverage and responsive technical support protect the purchase after it arrives, and our team can confirm revision levels and software compatibility before you order. For volume requirements we also offer configuration checks and staged delivery options.
Contact our sales team for current availability, lead time and shipping options for the N7K-F248XP-25. We respond quickly with stock status and a firm quote, so you can plan the refresh or expansion with confidence.
Key Specifications
Applications
Capacity Expansion
Add ports and performance to existing chassis.
Upgrade Path
Modernize aging platforms with compatible modules.
Flexible I/O
Mix copper, fiber and high-speed uplinks.
Buying a Pre-Owned N7K-F248XP-25
Verify the unit is tested, firmware confirmed, and condition documented. Every unit is fully tested and warranty covered. Contact our team for current stock and availability.
| N7K-F248XP-25 | |
| Product list | |
| Product code | N7K-F248XP-25 |
| Power cable | No |
| Button | No |
| Product parameters | |
| Product Type | Expansion Module |
| Number of Total Expansion Slots | 48 |
| Application/Usage | Data Networking Optical Network |
| Expansion Slot Type | SFP (mini-GBIC) SFP+ |
| Introduction | The Cisco Nexus® 7000 48-Port 1 and 10 Gigabit Ethernet F2-Series Module (referred to as the Cisco Nexus 7000 F2-Series Module in this document) offers outstanding flexibility and wire-rate performance on each port. The module enables the deployment of high-density, low-latency, scalable data center architectures. |
| Physical specifications | |
| Height | 4.8 cm |
| Width | 38.1 cm |
| Depth | 53.6 cm |
| Weight | 6.35 kg |
| Compatibility Information | |
| Apply to | Cisco Nexus 7000 Series Switches |
N7K-F248XP-25 - Module Notes
This N7K-F248XP-25 line card/module variant is designed for the chassis slot type and fabric requirements of its platform family. Verify the slot compatibility, supported forwarding modes, and firmware version required for this specific SKU before ordering.
For capacity expansion, confirm the port density, uplink type, and any software feature dependencies of this module. Our team can verify revision levels and platform compatibility before dispatch.
Each N7K-F248XP-25 module is inspected, tested and verified for correct operation before leaving our facility, including port status, management access and firmware state.
N7K-F248XP-25 - Cisco Series Notes
This listing is part of the Cisco enterprise networking product family, sourced and tested by LinkNewNet for enterprise deployment. Cisco module/line card expands the capability of a chassis platform, adding interface density, forwarding capacity, or service features. It is installed in a matching chassis slot and managed as part of the parent platform.
Deployment guidance: When planning this N7K-F248XP-25 unit into a network, confirm the software image (IOS/IOS-XE/NX-OS) required, the power and cooling profile, and the upstream/downstream interface types that match your existing infrastructure. For a like-for-like refresh, match the feature set of the units already in service so management and automation behave consistently.
Our Cisco reconditioning process: Every pre-owned Cisco unit at LinkNewNet passes a documented reconditioning flow before dispatch - visual inspection, internal cleaning, firmware verification, port-by-port testing, and configuration reset to factory defaults. This ensures the unit you receive operates reliably and integrates cleanly with your existing Cisco management tools.
Related models in this family: AIR-LAP1142N-E-K9, A9K-750W-AC, ASR1000-ESP40, A9K-2X100GE-TR, ASR1000-6TGE. Compare specifications to confirm the right port density, feature set and uplink options for your deployment.
